Granite component

Granite components are usually not a single marble platform, but assembled from a variety of product parts, such as inlaid steel sleeve, installed linear guide rail, three coordinates assembled by beam and column, etc. these accessories need to be installed with extra care, so that the assembled components can meet the requirements of user design and use

processing process of granite component manufacturer:

1 Rough grinding: the current rough grinding can be completed by the original manual rough grinding directly on the gantry fine planing, saving labor. The plane accuracy of the platform after fine washing on the gantry fine planer is within 20 microns per square meter

2. Fine grinding: grind the granite components placed for more than 48 hours in the constant temperature workshop at 20 ± 2 ℃. In the grinding process, it is necessary to cooperate with grinding sand and water. The grade of grinding sand needs to be replaced with different grades according to the accuracy of the platform. Only in this way can we grind the platform with accurate accuracy

3. Deep processing: after the accuracy of the platform meets the requirements, it is necessary to carry out further processing according to the drawings, such as drilling holes and slotting of various sizes

4 Cleaning: after the completion of deep processing, the marble platform components shall be cleaned and cleaned. For example, for the cleaning of the drilling platform, the stone slag in the hole shall be cleaned first, then cleaned and dried, and then the inserts

5. Polishing: the marble platform polished on the non working surface has smooth surface and small plane roughness value

precautions for granite component assembly:

granite components and parts shall be cleaned and cleaned before assembly. Diesel oil mixed with gasoline can be used as washing solution for cleaning, and then blow dry with compressed air. Check before assembly

1 Check whether the joint surface is flat, whether there is deformation, and whether the contact of the joint surface is tight and flat

2. The fitting size of matched parts shall be accurate, and the fitting size shall be rechecked or sampled during assembly. Otherwise, the accuracy will not meet the requirements

3. The seal shall be pressed into the sealing groove in parallel, and the sealing surface shall not be twisted, deformed, damaged or scratched

before assembling granite components with other parts, you only need to check carefully and carry out the operation according to your own situation and design concept

granite components can be manufactured according to the design drawings of the demander. The marble components can be customized according to the drawings. It can process T-shaped groove, punching, V-shaped groove, dovetail groove, grooving or hole inlaid metal parts, such as marble base, gantry, column, air floating block, punching inlay and other granite components of coordinate / automation equipment / laser engraving machine