Granite special-shaped member

Special shaped granite components can be manufactured according to the design drawings of the demander. The marble components can be customized according to the drawings. It can process T-shaped groove, punching, V-shaped groove, dovetail groove, grooving or hole inlaid metal parts, such as marble base, gantry, column, air floating block, punching inlay and other marble platform components of coordinate / automation equipment / laser engraving machine

granite special-shaped component is a benchmark tool for detailed detection. It is often used in various detection and inspection work. It is very applicable in flatness measurement and laboratory experiment. Grooves and various holes can be processed on granite special-shaped components. Generally, through holes, strip holes, threaded holes, T-grooves, U-grooves and so on can be processed. The marble mechanical components with grooves can also be called marble components. Many special-shaped flat plates are called granite special-shaped components

precautions for the assembly of granite special-shaped components:

the granite special-shaped components and parts shall be cleaned and cleaned before assembly. Diesel oil mixed with gasoline can be used as washing solution for cleaning, and then blow dry with compressed air. Check before assembly

1 Check whether the joint surface is flat, whether there is deformation, and whether the contact of the joint surface is tight and flat

2. The fitting size of matched parts shall be accurate, and the fitting size shall be rechecked or sampled during assembly. Otherwise, the accuracy will not meet the requirements

3. The seal shall be pressed into the sealing groove in parallel, and the sealing surface shall not be twisted, deformed, damaged or scratched

before assembling granite special-shaped components with other parts, you only need to carefully check and operate according to your own situation and design concept

operation steps of granite special-shaped components

1. Before measuring on the marble platform, check whether the marble platform is clean, obviously damaged, inclined, etc

2。 Place the measuring object gently on the marble mechanical component for various tests

three. After the test, the platform of granite special-shaped components shall be cleaned